LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.
OEM#: 535-110LKG 610 10 LEAD ELECTRICAL SAFETY ANALYZER, 110 V by Netech Corp.
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp
LKG 610 Electrical Safety Analyzer is designed to test any piece of electrically operated patient care equipment. This full featured analyzer is microprocessor controlled and has a complete compliment of ten leads. LKG 610 measures line voltage, outlet polarity, device current, earth leakage current, chassis resistance, and case leakage current. In addition, it performs lead ISO tests and point-to-point measurements.
All tests are quickly and easily performed by selecting the appropriate test function key. Measurement results are displayed on the large LCD screen with measurement units clearly indicated by an LED. Large switches change the polarity, open and close neutral, and lift the ground. Ten universal lead connectors accept both snaps and any size posts. Calibrated test points are available to ensure performance accuracy and repeatability. Either AAMI or IEC 601-1 test loads may be selected. The receptacle is fused with an accessible 20A fuse and the tester itself is fused internally.
- Fast, accurate, and portable
- Easy to use
- Large LCD display
- Accessible line fuse
- Calibrated test points
- Selectable test loads
- 15 and 20 amp capabilities
- Point-to-point testing
- Uses any test cable
- 10 lead universal connector
- Complies with both aami and iec 601-1 test loads
- Power requirements: 110 VAC 50 - 60 Hz, 20 Amp or 220 VAC 10 Amp maximum rated for the test outlet and 0.1 Amps rated for the unit
- LED unit of measure indicator
- Controls: 12 Push Button Function Keys - Open/Closed, Neutral Switch Normal/Off/Reverse Polarity Switch, Momentary Ground Open Switch, 10 Universal Snap/Post ECG Connectors Test Load Selector Switch
Accuracy:
- Resistance: +/- 2% +/- 1 LSD
- Leakage: +/- 1% of FS DC to 1 KHz +/- 1 LSD, +/- 2% of FS 1 KHz to 100 KHz, +/- 4% of FS 100 kHz to 1 MHz
- Instrument Current: +/- 2% +/- 1 LSD
Calibrated Test Points:
- Reference Ground: 1 Ohm
- Leakage: 200 microamp